Make bat

How to Make A Baseball Bat

Recently, I learned how to make a baseball bat for my son. I have prepared quite a bit of knowledge for this plan. And I had an acceptable product. I want to share for everyone to comment on their way.

If you think this is too difficult, you can rely on advice from experienced people through the article “Top 9 Baseball Bat” to choose to buy yourself the most suitable stick.

Materials to prepare:

To start the work, I need to prepare the ingredients. It is very easy to find and purchase. I have prepared the following items:

A model baseball bat.

Custom cuts of wood, meeting the size of the bat you want to make

Perforated kits with diverse chisels such as oblique, pointed, sickle, straight, …

Lathe, surface polishing machine, hammer, wood saw planer, ball pen, and scale.

Related: Best wood Baseball Bats

wood

Manufacturing steps to cause the baseball

Step 1: Create a basic shape for the log

First, I took the piece of wood prepared to form a rectangular box, size: 37 inches long by 3 inches by 3 inches.

I then use opaque to remove its corners, so that the cross-section is octagonal, which will reduce the amount of wood you need to remove.

If you order a piece of wood that has been prepared for a baseball bat, you may not need to do this step like me.

Step 2: Mark the locations where wood needs to be removed

You use the prepared baseball bat model

Place the model on the top of the log, using a marker pen every 4 inches 1 times the diameter of the bat.

The marker will serve as a guide when turning wood. These measurements represent 4-inch increments from the crown to the muzzle. [2]

The knob should measure diameter 2.

The knob should measure 2 ”diameter.

4 “diameter is 1”

8 “diameter is 1”

12 ”diameter is 1 ⅛”

16 ”diameter is 1 ¼”

20 ”diameter is 1 ¾”

24 “diameter is 2 3/16”

28 ”diameter is 2 7/16”

32 ”diameter is 2 ½”

Step 3: Turning wood according to the marked size:

Put the stick in the lathe, making sure it is in place and firmly.

I used the instructions at “wikihow” to perform this stage:

  1. Turn on the lathe
  2. Use a roughing gouge to round out the wood into a cylinder
  3. Make diameter cuts every four inches as a guide
  4. Use a gouge to connect the diameter cuts of the first 12 inches of the barrel
  5. Remove wood along the handle end of the bat
  6. Remark the bat with 4-inch increments
  7. Use a skew chisel to cut diameter cuts every four inches along with the handle
  8. Connect the diameter grooves using the gouge chisel
  9. Measure the desired bat length from the end of the barrel
  10. Create the knob of the bat
  11. Check the bat for bumps
  12. Sand the bat

Fist project

Step 4: Complete the bat

I use 2-layer varnish, Min-Wax wax to finish the bat surface.

After a period of hard work, the result I received was a pretty satisfactory bat. However, the feeling of holding it is not really good. If you really want to personalize your bat, I hope you give it a try. Good luck!

punching-bag-workout

Basic tips for practicing with a punching bag at home

 

Hello everyone for visiting our Self Defense Martial Arts Blog. My name is Tom, the person in charge of content on the Blog.
After two articles on consulting the best humanoid punching bags in 2020 and comparing the standard BOB XL and BOB punch bags. The two articles have been loved and appreciated by many readers, and help you understand the advantages and disadvantages of each type of punching bag. Today I would like to write an article on practice exercises with punching bags at home.
It may seem simple when you throw a punch into the punching bag, but if you have never used a punching bag, it will be a bit difficult. Because the punching bag weighs between 50 and 150 pounds, you will experience resistance from the punching bag that makes you feel jarring and a little painful. Therefore, to be able to practice with the best results, you need to do the following:
1. Warm-up: The goal is to warm up the body, so as not to suffer injuries such as ligaments stretch, cramps, muscle strain .. during exercise. You must warm up before practicing with the punching bag of about 10 minutes. Warm-up exercises include: running on the spot, jumping jack, plank …
2. Standing upright position: Standing in front of the punching bag, one arm away from the pocket, the two legs stand staggered together, and form a 60-degree angle. If you are right-handed, your left-hand takes a stance (protecting your face) and your right hand directly punches in the front pocket. If you are left-handed, do the opposite of the above, which is: right-hand posture (face protection), your left hand punched directly into the punching bag in front of you. Practice this exercise until you become proficient, then move on to the next exercise.
3. Crossing: By putting all of your energy into focusing on your fists, and changing the order of your legs and arms (if you punch your right hand then your left leg is in front and if your left hand is punched, your right leg is first) ). In this exercise, there are two types of diagonal punches, the first being diagonal punching from right to left or from left to right. The advantage is fast speed, used when attacking opponents. The downside is not a strong punch force, the opponent easily dodges or blocks. The second form is diagonal punching from the bottom up (hook punching). The advantage of this type of punch is a great power, can be used when attacking and defending, opponents are harder to dodge and block.
Above are the basic types of exercise with punching bags, which help you practice at home easier. In the following article, I will share more details about other exercises with punching bags, you look forward to it.

Read more: 10 Heavy Bag Training Tips

Manual safe all-purpose aluminum cutting machine

For aluminum glass workers often have to use the versatile aluminum cutter, certainly not to skip this article! In this article, MRO news will share with you how to use safe aluminum cutting machines to ensure work efficiency as well as introduce addresses of reputable power tools in the Vietnamese market that you should refer to.

1. Manual safe multi-purpose aluminum cutting machine

Although the capacity and cutting speed of aluminum cutting machines are not high, this model still holds the list of machines that are dangerous to users when used. So equip yourself with the basic knowledge to ensure absolute safety when performing.

More:  circular saw blades for cutting aluminum

Use a safe and versatile aluminum cutter

Safety principle for multi-purpose aluminum cutting machine users

In the process of operating the multi-purpose aluminum cutting machine, there will be fire sparks due to the cutting process creating friction between the blade and the material. The sparks will cause damage to the body, especially the eye.

Workers need to bring workwear such as earplugs, sunglasses to protect the body from damaging sparks.

Make sure to turn off the machine completely when you want to move, because the multifunctional aluminum cutting machine has a large and bulky structure, so it is difficult to move, to avoid serious damage caused by the blade. The machine stopped completely when operating.

When the machine operates, it will produce fire flowers, so do not use the machine in environments containing flammable objects, minimizing the risk of fire.

Do not use the mower in a place with high temperatures, lots of oil, and sharp objects.

Note the use of universal aluminum cutting machines

  • Adjust the cutting angle to match the object.
  • Clamp the workpiece tightly to the machining size
  • Cutting workpiece adjusts load evenly
  • Move the machine when it has completely stopped
  • The top end of the drum should be used to cushion easily, without cutting the object to interrupt the process.

The size of the object at a 0-degree angle

  • For circular objects: 129
  • For square objects: 119 × 119
  • For rectangular objects: 100 × 196
  • Sharp objects: 130 × 130

These are the most basic knowledge while using versatile aluminum cutting machines that mechanic should know to make sure your work is always safer and easier. In addition, depending on the job, the part to be cut, you need to have different techniques for cutting speed, cutting speed, etc. Pay attention to the specifications of the machine when using it!

More: